Nortel Networks NN43001-301 - Manual (Page 291)

ISL software implementation 291
Prompt Response Description
N201 4(260) Maximum number of octets in information
field.
K 1-(7)-32 Maximum number of outstanding
unacknowledged frames (NAKS).
LD 15 - Enable the ISDN option
Prompt Response Description
REQ: NEW
CHG Add new data.
Change existing data.
TYPE: NET Networking data.
CUST 0-99
Customer number
Range for Large System, Call Server 1000E, and Media
Gateway
1000E
0-31 Range for Small System, Media Gateway 1000B,
ISDN YES Customer is equipped with ISDN.
PNI 1-32700 Customer private network identifier. MUST be unique to
this customer in the private network. Used as part of the
setup message for feature operation such as Network Ring
Again and Network ACD.
HNPA NPA Telephone area code for this system. Sent as part of setup
message as CLID.
HNXX NXX Telephone local exchange code for this system. Sent as
part of setup message for calling line identification.
HLOC XXX Home location code (NARS).
LSC 1-9999 One to four digit Local Steering Code established in the
Coordinated Dialing Plan (CDP). The LSC prompt is
required for Calling Line ID and Network ACD.
AC2 Access Code 2. Enter call types (type of number) that use
access code 2. Multiple responses are permitted. This
prompt only appears on NARS equipped systems. If a call
type is not entered here, it is automatically defaulted to
access code 1.
NPA E.164 National.
NXX E.164 Subscriber.
INTL International.
SPN Special Number.
LOC Location Code.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Copyright © 2003-2007, Nortel Networks
.