AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 10)

SIP–DECT OM System Manual Release 3.0 1 Overview
Aastra depl-1624/1.0 Page: 10 (241)
RFP 32 IP / RFP L32 IP / RFP 32 NA
RFP 34 IP / RFP L34 IP / RFP 34 NA
RFP L42 WLAN / RFP 42 WLAN
1 Power jack (120 V/230 V AC adapter)
2 Ethernet jack; Power supply in line with Power over Ethernet standard IEEE 802.3af
The difference between L-RFPs (L32 IP / L34 IP / L42 WLAN) and non-L-RFPs (32 IP /
34 IP / 42 WLAN) is that the “L” variants have a built-in license, please see chapter Licensing
for details.
Note: Since SIP–DECT 3.0, the previous RFP family (RFP (L) 32/34 IP and
RFP (L) 42 WLAN) cannot longer run the Open Mobility Manager (see also chapter
1.3). The SW package for previous RFPs has a tftp extension e.g. “iprfp2G.tftp”.
1.2.1.2 New RFP Types (Since SIP–DECT Release 3.0)
With SIP–DECT release 3.0 Aastra provides 3 new types of RFPs for the SIP–DECT
solution:
•
RFP 35 IP / RFP L35 IP
DECT RFP as indoor model
•
RFP 36 IP / RFP L36 IP
DECT RFP as outdoor model with built-in dipole antennas
•
RFP 37 IP / RFP L37 IP
DECT RFP as outdoor model with connectors for external directional antennas
•
RFP 43 WLAN / RFP L43 WLAN
DECT RFP + WLAN Access Point as indoor model with internal antennas for DECT and
WLAN