AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 49)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 49 (241)
These numbers are used for SOS and ManDown calls if no user specific number is set.
7.4.1.1 Restarting the OMM
To restart the OMM call up the System settings web page and press Restart . There is also
the option to reset the configuration data. To do so, activate the Discard all settings
checkbox.
A reset web page is loaded then displaying a progress bar and the login web page is loaded
automatically if the OMM is reachable again.
7.4.1.2 Updating the OMM
If the OMM is running on an RFP, the Update button is available on the System settings
web page. Pressing the Update button forces the RFPs to check for a new software for
update and initiates the software update process of RFPs. This includes the OMM software if
the OMM resides on an RFP. For more details about updating the OMM see the section
9.12.