AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 104)

SIP–DECT OM System Manual Release 3.0 8 OM Management Portal (OMP)
Aastra depl-1624/1.0 Page: 104 (241)
DTMF settings
For a description of the parameters which can be set in the DTMF settings tab, please refer
to the description of the SIP page of the OMM Web service (see chapter 7.4.2). The
corresponding parameters can be found there in the DTMF settings page section.
Supplementary services
For a description of the parameters which can be set in the Supplementary services tab,
please refer to the description of the SIP page of the OMM Web service (see chapter 7.4.2).
The corresponding parameters can be found there in the Supplementary Services page
section.
8.5.4 “User administration” Menu
In the User administration menu you configure the OMM user accounts.
User administration menu in configuration mode
The 3 user accounts “Full access”, “Read-only” and “Root (ssh only)” available via the User
administration page of the OMM Web service (see chapter 7.4.3) can also be configured in
the OMP. These are 3 predefined user accounts, which cannot be removed or renamed.
Only the “Root (ssh only)” account can be deactivated. The permissions are fixed. This is
consistent with the OMM WEB service. The meaning of the different account types is
described in section 9.14.1. In addition, the OMP allows to create additional user accounts
(login and password) and to assign specific permissions.
The tasks which can be performed are mode-dependant.