AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN User Manual
Page 26
SIP–DECT OM System Manual Release 3.0
2 Getting Started
Aastra
depl-1624/1.0
Page: 26 (241)
SIP: System, connect to PBX & change portable part SIP configuration
10 Navigate back to the
Portable parts
page. Click the
icon next to the desired portable
part entry to open the respective
Configure portable part
dialog. Change to
User name
and
Password
fields under the
SIP authentication
heading to the SIP account
credentials configured on the PBX (see chapter 7.4.2 and chapter 7.7.1). Note, that the
entered
User name
is sent to the PBX as “authorization username” within the SIP
“REGISTER” message.
Verify the SIP registration, for example on a status display of your PBX as shown above.
Place a test call from the DECT portable part to another phone attached to the PBX.
The next steps depend on your requirements and would typically include setting up a
standby OMM (see chapter 9.13) or setting up the Download over Air software-update for
Aastra 600d / 650c portable parts (see chapter 9.17).