AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 57)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 57 (241)
The following parameters can be configured using the OMM web service:
General settings
•
Read-only community : The SNMP community strings forms a password that is sent by
the SNMP management system when querying devices. The query is answered only if the
SNMP community string matches. You may use “public” as a default keyword for read-
only access.
•
System contact : Enter a descriptive text that typically is displayed in the SNMP
management software.
Trap handling
Activate the checkbox behind the Trap handling section to enable this feature.
•
Trap community : This community string is used if the SNMP agent informs the SNMP
management system about events (Traps).
•
Trap host IP address : Enter the IP Address that the SNMP agent uses to send traps.
Further notes
•
The RFP needs an initial (one-time) OMM connection to receive its SNMP configuration.
In case of a reset, this configuration does not change. Changing the SNMP configuration
on the OMM forces all agents to be reconfigured.
•
The agent does not support MIB-II write access, SNMPv2-MIB read/write access, NET-
SNMP-MIB read/write access, NET-SNMP-AGENT-MIB read/write access and SNMPv3.
•
For background information on using SNMP with the SIP–DECT system please refer to
section 9.16.