AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 178)

SIP–DECT OM System Manual Release 3.0 9 Configuration und Administration Aspects
Aastra depl-1624/1.0 Page: 178 (241)
Restore URL optional URL for an automatic OMM Database
import (see chapter 7.4.6.2 and
chapter 8.5.5.1)
Configuration file server optional URL of a server with configuration files
(ipdect.cfg|<mac>.cfg) alternatively/in
addition to OM Configurator settings.
Syntax:
{ftp|ftps|http|https}://[user:password@]
server/[directory/]
or
tftp://server/[directory/]
Core dump*
* can not be set via
DHCP
optional In case of an system error the RFP
creates core dump files and transfers
them using TFTP to the folder
configured in the TFTP file name.
The configuration can only be set after powering up or at the retry phase (LED flashing 0.25
Hz) or in kernel mode, please see chapter 9.5 for details. The OM Configurator tool waits
2 seconds and retries transmitting the data 3 times.
If you want to read the configuration parameters from an RFP, set the MAC address and the
IP address additionally and press the
List configuration button. All parameters will be listed
in the OM Configurator tool.
Press the Reset configuration button to clean all input fields and additional parameters.
Since the OpenMobility version 1.5, login data can be used to prevent against unauthorized
configuration changes. If authorization is used, mark the
Login checkbox and enter the user
name and the password into the fields User and Password . This OM Configurator is
backward compatible to previous OpenMobility versions without login support.
A forgotten password could not be recovered but deleted using the Factory defaults button.
Send the displayed cookie to the OpenMobility manufacturer support. After receiving the
password reset key from the support, enter it into the
Enter reset key dialog. This will delete
the complete local configurations from the internal flash memory of the RFP, too!
Please note: With the password reset all local configurations inclusively possible existing
OpenMobility configurations will be deleted.
An RFP outside the local LAN segment could also work as proxy. Mark the as proxy
checkbox to enable this functionality. Then the MAC address will be used to address an RFP
in the LAN segment of the proxy RFP. Scanning for available RFPs and configuration of
multiple RFPs via a configuration file could be used also with the proxy mechanism.