AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 14)

SIP–DECT OM System Manual Release 3.0 1 Overview
Aastra depl-1624/1.0 Page: 14 (241)
Additional information on the following topics are available with separate documents.
•
Locating: please see the SIP–DECT; OM Locating Application; Installation, Administration
& User Guide /25/.
•
Integrated Messaging and Alerting Service: please see the SIP–DECT; OM Integrated
Messaging & Alerting Application; Installation, Administration & User Guide /26/ and the
SIP–DECT; Aastra 610d, 620d, 630d; Messaging & Alerting Applications; User Guide /28/.
•
Integration of SIP–DECT in unified messaging and alarm environments: please see /28/
and the OM Application XML Interface (OM AXI) specification /28/.
•
User data provisioning: please see the SIP–DECT; OM Handset Sharing & Provisioning;
User Guide /27/.
•
Administration and Monitoring by 3rd party applications: please see the OM Application
XML Interface (OM AXI) specification /28/.
•
SIP–DECT XML terminal interface: please see the SIP–DECT XML terminal interface
specification /34/.
1.3.2 SIP–DECT Special Features and Capacities
Special features and capacities of the SIP–DECT 3.0 solution are:
Feature/Handset GAP 142d 600d
1
650c
Large DECT Systems (XXL) No connection
handover
beyond
256 RFPs yes yes yes
Messaging & Alerting no no yes yes
Initiate Alarm Trigger *, # feature
access code
procedure,
no sensor
alarm *, # feature
access code
procedure,
no sensor
alarm yes yes
Locating yes yes yes
enhanced
locating
features yes
enhanced
locating
features
DECT XQ no no yes yes
UTF-8 and alphanumeric
dialing support
2
no no yes yes
SIP–DECT XML terminal API
2
no no yes yes
CAT-iq 1.0 / Aastra Hi-Q™
audio technology
2
no no no yes
1
requires Aastra 600d firmware release 4.00 or higher
2
new with SIP–DECT 3.0