AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 142)

SIP–DECT OM System Manual Release 3.0 8 OM Management Portal (OMP)
Aastra depl-1624/1.0 Page: 142 (241)
8.8.11 Enabling / Disabling PP Event Log
You can store an PP event log file in monitor mode. Proceed as follows:
1 To enable/disable the PP event log, click on the Log events command in the task bar on
the right of the Portable parts panel:
- PP event log is enabled.
- PP event log is disabled.
2 Repeat step 1 to disable/enable the PP event log.
The PP event log will be stored in a file called “pp_event.log“. This file can be found in the
users home directory:
•
on a Linux system it is located under ‘~/.oamp’,
•
on a windows system under ‘c:/Users/<user>/MyDocuments/.Oamp’.
8.9 “System features” Menu
The System features menu provides the following entries:
Configuration mode Monitor mode See chapter
General settings General settings 8.9.1
Feature access codes (FAC) Feature access codes (FAC) 8.9.2
Alarm triggers Alarm triggers 8.9.3
Digit treatment Digit treatment 8.9.4
Directory Directory 8.9.5
XML applications XML applications 8.9.6