AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 60)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 60 (241)
tftp://server]/[directory/]file.To be available at OMM startup time and to allow an initial
configuration via automatic import, this URL has to be specified via DHCP (option 24, see
chapter 9.5.4) or OM Configurator (see chapter 9.6). If such a URL is given by DHCP or
OM Configurator, the OMM tries to import a configured database file automatically during
the OMM startup. The file URL configured via DHCP or OM Configurator is always
displayed.
2 Click OK to confirm the settings for the automatic import.
Before a database is accepted and replaced by automatic import process, the OMM
performs the following checks:
•
The integrity of the file must be OK.
•
To avoid the import of the same file multiple times, the checksum of the new database file
and the checksum of the last database import file (stored in the flash) must be different.
•
For authorization/authentication reasons:
The PARK of the new database file must be the same to the PARK of the current
configuration.
•
The admin/full access account (see also chapter 9.14.1) of the new database file must be
the same to the one of the current configuration.Only if all of these checks are successful
the database file is accepted.
If the database file is not accepted or was not found, an error message is displayed on the
Status page of the OMM Web service.
The automatic OMM database import allows to change all configuration settings but not the
account settings and the PARK. There is only one exception: changing the default user
account and the PARK for an initial configuration is possible. After the initial configuration,
the user account settings and PARK can only be changed via the Web service on the target
OMM itself.