AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 94)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 94 (241)
To configure the FAC feature:
1 FAC number : Enter a unique FAC number.
2 Activate the appropriate checkbox(es) to enable the corresponding FAC feature(s). For
each enabled FAC feature enter an assigned access code.
3 Press the OK button.
Afterwards the appropriate action can be performed by dialing the “FAC number” followed by
the “FAC access code” en bloc from any subscribed DECT handset.
In the example above a subscribed user can activate the OMM DECT subscription by dialing
“9999*4701#” en bloc.
Please note: Overlap sending is not supported for FAC. “FAC number” and “FAC action
code” must be entered en bloc.
FAC functions will be confirmed by an audible indication to the user (in-band tone signals).
7.10 “Licenses” Menu
The Licenses page provides an overview on the currently used license. On this page you
can also import an activation or license file:
1 Select the path and file name where the activation or license key is stored.
2 Afterwards press the Import button.
For a detailed description on the OMM licensing model see chapter 4.