AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 127)

SIP–DECT OM System Manual Release 3.0 8 OM Management Portal (OMP)
Aastra depl-1624/1.0 Page: 127 (241)
•
Refresh RSSI : request new RSSI values from OMM for active sync relations.
Viewing sync relations
RFPs for which sync relations shall be shown, can be selected as follows:
•
Select (more than one) RFP in device list table (see chapter 8.7.1)
or
•
Activate RFP mouse menu in sync view: Press the right mouse button while mouse cursor
is on an RFP icon and select the
Activate Monitoring command from the context menu.
The color of the RFP icon indicates synchronization state of that RFP:
•
Grey: inactive
•
Red: not synchronized
•
Yellow: searching
•
Green: synchronized
Sync relations between RFPs are represented by arrows.
Viewing RSSI values
The color of the arrows between RFPs is an indication of the RSSI value of the link:
•
Red: RSSI < -90 dBm
•
Orange: -90 dBm <= RSSI <= -70 dBm
•
Green: RSSI > -70 dBm
If the mouse is moved over an RFP with monitoring activated, a tool tip with RSSI values will
be opened.
You can use the RSSI threshold slider to limit the display of values in the tool tip.