AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 126)

SIP–DECT OM System Manual Release 3.0 8 OM Management Portal (OMP)
Aastra depl-1624/1.0 Page: 126 (241)
When the export is started, a file system dialog will be opened and the export file name can
be selected. If all parameters are selected for export, the export file can be re-imported using
Enrolment (see chapter 8.7.3). For information about RFP export file format see Appendix,
chapter 11.8).
8.7.5 “Sync view” Menu
The Sync view menu allows to check the synchronization relations between RFPs in a
graphical manner.
Note: For background information on RFP synchronization please refer to chapter 9.2.
To open the task panel for sync view press the arrow icon in the upper right corner of the
sync view panel.
The task panel is displayed on the right. The following tasks can be performed:
•
Show all RFPs : If this checkbox is activated, all configured RFPs are shown in the sync
panel; else only selected RFPs are shown.
•
RFP positioning : If this checkbox is activated, RFP positions can be changed; else RFP
positions are fixed.
•
Reset monitoring : reset all active sync view monitoring relations.
•
Image : select background image for sync panel.
•
Reset view : reset selected view (zero coordinates are reset to the left upper corner of the
sync view panel).