AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 122)

SIP–DECT OM System Manual Release 3.0 8 OM Management Portal (OMP)
Aastra depl-1624/1.0 Page: 122 (241)
2 In the task bar on the right of the Radio fixed parts panel click on the Show sync.
relations command.
The view switches to the Sync view menu . For further information see chapter 8.7.5.
Note: At least two RFPs must be selected for showing their synchronization relations.
8.7.1.7 Selecting Columns
You can adapt the parameters shown in the RFP table to your needs:
1 In the task bar on the right of the Radio fixed parts panel click on the Select columns
command.
The Select columns dialog opens.
2 Select the columns that shall be shown by activating the appropriate checkboxes.
3 Click the OK button.
The RFP table will be adapted accordingly.
8.7.1.8 Filtering RFP Table
You can filter the list of RFP datasets shown in the RFP table by using a filter.
1 In the task bar on the right of the Radio fixed parts panel click on the Filter command.
The Filter dialog opens.
2 Enter the search string that serves as filter criterion. You can enter digits and characters.
The search is case sensitive.