AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 188)

SIP–DECT OM System Manual Release 3.0 9 Configuration und Administration Aspects
Aastra depl-1624/1.0 Page: 188 (241)
9.11.1 System Requirements
The PC-based OMM requires the following configuration:
•
Red Hat© Enterprise Linux 6 for x86 server
•
Server HW minimum:
- Processor : Dual Core Intel® Xeon® 3065, 2.33GHz, 4MB cache
- Bus 1333 MHz
- Memory : 2GB DDR2 SDRAM 667 MHz
- Hard disk: 80 GB SATA 7200 rpm
- 1 Gbit/s Ethernet interface
9.11.2 Installing the OMM Software
The OMM software for Linux Redhat x86 server is provided in form of a self-extracting
executable file e.g. “SIP-DECT_3.0.bin”. This binary file comprises two Red Hat© packages:
•
SIP-DECT-OMM-<SIP-DECT-version>.i586.rpm
OpenMobility Manager software.
•
SIP-DECT-HANDSET-<handset-version>.i586.rpm
Software for Aastra 610d/620d/630d and Aastra 650c handsets
The Aastra 610d/620d/630d and Aastra 650c handset software can be updated via the Air
interface, see chapter 9.17. A separate software package can also be provided for specific
updates of the handset software.
IMPORTANT : Log on as user root to install and/or update OMM. If you do not login as
root to open the OMM console, the path to ommconsole is not set and
you have to enter the whole path “/usr/sbin/ommconsole” to start the
OMM console.
Command syntax
For extraction and automatic standard installation
sh SIP-DECT_<version>.bin
For extraction and automatic standard installation
sh SIP-DECT_<version>.bin -f
For extraction of RFP packages only
sh SIP-DECT_<version>.bin –x
RPM packages can also be installed manually.
For a first OMM type installation
rpm –i SIP-DECT-OMM-<version>.i586.rpm
For an OMM software update (see chapter 9.12)
rpm –U SIP-DECT-OMM-<version>.i586.rpm
For Aastra 610d/620d/630d and Aastra 650c handset software installation
rpm –i SIP-DECT-HANDSET-<version>.i586.rpm