AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 59)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 59 (241)
3 User name , Password (in case of import from an external server): If necessary, enter the
account data of the server.
4 File : Enter the path and file name which include the OMM database If you have selected
the FILE protocol, the Browse button is displayed and you can to select the file from the
file system.
5 Press the Load button.
Before the OMM accepts the database, a validation check is performed. If the database is
verified as valid, the OMM will be reset to activate the new database.
Note: After the reset all configurations of the restored database are taken effect but not the
user account settings. The user account settings can be only modified locally via the
OMM Web service (see chapter 7.4.3) and will never be restored by an database
import.
7.4.6.2 Automatic Database Import
The automatic database import feature makes it easier to restore a prepared OMM database
into an OMM for an initial configuration or for update reasons.
Please note: An automatic import of a database leads to a reset of the OMM to take effect.
In the Automatic import section of the DB management page enter the following:
1 Startup only : Activate this option if the import should be started for an initial configuration.
2 Startup and periodically : If this option is activated, the OMM tries to import the
configured database file during startup and at the configured time of day.
3 Time : Enter the time, the import should be started.
Please note: An automatic database import at a configured time recommends the time
synchronization with an NTP server. For NTP server configuration see chapter
9.5.4 and chapter 9.6.
1 URL : The database file for an automatic import has to be configured in an URL format like
{ftp|ftps|http|https}://[[user:password@]server]/[directory/]file
or