AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 233)

SIP–DECT OM System Manual Release 3.0 11 Appendix
Aastra depl-1624/1.0 Page: 233 (241)
Parse log about import / instruction processing
ok: active = 1
ok: net_mask = 255.255.0.0
ok: tftp_server = 172.30.200.92
ok: tftp_file = iprfp2G.tftp
ok: omm_1 = 172.30.111.188
ok: omm_2 = 172.30.11.181
ok: gateway = 172.30.0.2
ok: dns_server = 172.30.0.4,172.30.0.21
ok: dns_domain = Aastra.com
ok: ntp_addr = 192.53.103.108,192.53.103.104
ok: ntp_name = ptbtime1.ptb.de,ptbtime2.ptb.de
ok: syslog_addr = 172.30.200.92
not set: syslog_port
ok: core = 0
ok: use_vlan = 1
ok: srvlist = 172.30.0.4,172.30.0.21
ok: broadcast_addr = 172.30.255.255
ok: vlan_id = 4
ok: country = 1
ok: preferred_tftp = 1
ok: import_url = https://server/importfiles/ommxyz_conf.gz
ok: config_file_server = https://server/configfiles/
:parsing ok:
processing of section: data_sequence
[…]
create data:
[…]
RFP configuration:
[…]
11.8 RFP Export File Format
General
RFP export files are created by OMM Management Portal in ‘csv’-file format which can be
easily viewed by a spreadsheet application. Export file contains all or a part of the following
parameters:
•
MAC address
•
Location name
•
DECT active
•
Cluster
•
Paging area
•
Synchronisation source
•
Reflective environment
•
Site
•
Building
•
Floor
•
Room
•
WLAN profile reference