AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 169)

SIP–DECT OM System Manual Release 3.0 9 Configuration und Administration Aspects
Aastra depl-1624/1.0 Page: 169 (241)
9.5.5 RFP LED Status
RFP (L) 32/34 IP
RFP 32/34 NA
RFP (L) 35/36 IP
RFP (L) 42 WLAN
RFP (L) 43 WLAN
LED 1 Info / Booter; LED 2 System;
LED 3 DECT; LED 4 (unused)
LED 1 Info / Booter; LED 2 System
LED 3 DECT; LED 4 WLAN
The following tables show the LED status of an RFP according to the different states.
A red respectively orange colored field in the table means that the LED glows permanently in
red or orange. A split field with e.g. the specification 1s/1s means that the LED is flashing
with a frequency of one second LED red on and one second LED off. Grey means that the
LED is off.
9.5.5.1 Booter LED Status
RFP (L) 35/36 IP, RFP (L) 43 WLAN
The RFP (L) 35/36 IP and RFP (L) 43 WLAN booter uses LED1 for signaling its activity. After
power up the LED 1 (INFO) is turned on red continuously. The successful start of the boot
image is signaled by turning on LED 1 orange.