AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 83)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 83 (241)
RFP (L) 43 WLAN profile configuration
4 Change the desired settings of the WLAN profile. You need at last to define the ESSID
setting. The different settings are explained in detail in the sections below.
5 Activate the Profile active setting, otherwise the WLAN profile is inactive which de-
activates the WLAN function for RFPs that are assigned to this WLAN profile.
6 Press the OK button to apply the settings. If you created a new WLAN profile, you can
proceed by assigning the WLAN profile to the desired RFPs (see chapter 7.6.3). If you
changed an existing WLAN profile, the settings are applied to the assigned RFPs
automatically.
The following description details the different parameters that are available on the New
WLAN profile page resp. on the WLAN profile [Number] page.