Printronix SL4M - Manual (Page 114)

114
Chapter 4 PRINTER SETUP Menu
For example, with a print head that prints at 203 dpi you would use the
following formula:
Therefore, select a value that is equal to or greater than 5,151. The closest
available value is 6 KBytes.
The allowable range is 1 KByte through 20 KBytes, in 1 KByte increments.
The factory default is 01 KBytes.
NOTE: For most applications, the default settings for font memory are
acceptable. Therefore, do not change the defaults unless your
application requires an uncommon memory configuration.
Standard Chars.
This menu entry permits you to adjust the thickness or font weight of standard
text fonts.
The range is 0 to 512, and the factory default is 340.
Bold Chars.
This menu entry permits you to adjust the thickness or font weight of bold text
fonts.
The range is 0 to 512, and the factory default is 448.
Extra Bold Char.
This menu entry permits you to adjust the thickness or font weight of extra
bold text fonts.
The range is 0 to 512, and the factory default is 504.
NOTE: For most applications, the default settings for font memory are
acceptable. Therefore, do not change the defaults unless your
application requires an uncommon memory configuration.
OCR-A Chars.
Character weight adjustment of resident OCR-A characters.
The range is 0 to 512, and the factory default is 384.
OCR-B Chars.
Character weight adjustment of resident OCR-B characters.
The range is 0 to 512, and the factory default is 304.
203 x 203 x 1 x 1
8
= 5,151