Printronix SL4M - Manual (Page 154)

154
Chapter 4 Printing a Configuration
Printing a Configuration
We recommend that you print and store your configurations for future
reference. The printout provides a list of the parameters that were set when
you configured the printer.
To print a configuration:
1. Press the key to enter the Main menu.
2. Press the Right key until the following message displays:
3. Press the
↵ key to enter the CONFIGURATION menu.
4. Press the Down key until the following message displays:
5. Press the Left or Right keys to cycle through the following printout
options:
Current*
Factory
Power-Up
All
1-8 customized configurations
6. When the desired option displays, press the ↵ key. The printer prints the
specified configuration.
NOTE: If the configuration you want to print has not been saved, the
following message displays momentarily:
This message indicates that no configuration menu has been saved
under the configuration value you have selected and therefore cannot
be printed. You must either select another configuration to print or
load and then save a configuration to that configuration value first.
..
.
CONFIGURATION
Print Config.
Current*
CONFIG. DOES NOT
EXIST/Save First