Printronix SL4M - Manual (Page 155)

DIAGNOSTICS Submenus
155
Loading a Saved Configuration
Method 1
1. Press the key to place the printer offline.
2. Press the Up key. The following message displays:
3. Press the Up key until the desired configuration displays.
4. Press
↵
. Loading Saved/Configuration dispalys.
NOTE: Only configurations that have previously been saved appear as
options in the Load Config menu. If no configurations have been
saved, the only option under Load Config will be Factory.
Method 2
To use a different configuration:
1. Press the key to enter the Main menu.
2. Press the Right key until the following message displays:
3. Press the ↵ key to enter the CONFIGURATION menu.
4. Press the Right key until the following message displays:
5. Press Left or Right keys until the desired configuration displays.
6. Press
↵
. Loading Saved/Configuration displays.
NOTE: Only the saved configuration will display. The factory config will not
display. If there are no saved configurations, then the message “No
Saved Configs” will display.
Load Config.
Cfg1*
..
.
CONFIGURATION
Load Config.
Factory*