Printronix SL4M - Manual (Page 98)

98
Chapter 4 EMULATION MENU
PGL Setup Submenus
NOTE: The submenu descriptions do not include ZGL, TGL, IGL, STGL,
DGL, MGL, and IEGL emulations.
Character Group and Character Sets
This menu item selects the character set used by the printer. See page 96 for
the available character sets.
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6 inch from the top of one print line to the top of the next print line.
The options are 1 to 1000 LPI. The factory default is 6.0 LPI.
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (0D hex) from the host computer. If this feature is enabled, each
time the printer receives a carriage return, it inserts an additional Line Feed
code (0A hex) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
• CR = CR (factory default). Does not insert an extra line feed after each
carriage return.
• CR = CR + LF . Inserts an extra line feed after each carriage return. The
next print position will be print position 1 of the next line.
Define LF Code
This parameter forces the printer to insert an automatic Carriage Return code
into the data stream whenever a Line Feed code occurs. This can be used in
most installations, but it is required if the host computer does not send
carriage returns to the printer.
NOTE: For this menu to take effect in PGL, PGL Normal needs to be set to
PGL Menu (see page 94).
• LF = LF (factory default). Does not perform an automatic carriage return.
The next print position will be at the current print character position on the
next line.
• LF = CR + LF . Performs an automatic carriage return. The next print
position will be print position 1 of the next line.
Autowrap
This parameter determines if text will wrap to the next line when the line of
text exceeds the right margin.
• Disable (factory default). Truncates the text beyond the right margin until
a CR or CR + LF is received.
• Enable . Automatically inserts a CR + LF after a full print line.