Printronix SL4M User Manual
Page 203
Fault Messages
203
FILE SYS FULL
File Too Big
Yes/No
Insufficient flash
memory available to
store file.
Delete unncessary files and
select the Optimze&Reboot
menu option. Check the
Flash Avail menu option to
determine if there is enough
flash to store the file you
wish to save. Files too large
for onboard flash may be
saved on the (optional)
Extended Memory Cartridge
(EMC).
FILE SYS FULL
Optimize & Reboot
Yes
Insufficient flash
memory available to
store file.
Enter the PRINTER SETUP
menu and use the Optimize
& Reboot feature.
FILE SYS WRITE
Check Flash
Yes/No
Problem writing to flash
memory.
Power off the printer for 15
seconds, then power back
on. If the problem persists,
contact your authorized
customer service
representative.
Table 15. Fault Messages
Displayed Message
Can User
Correct?
Explanation
Solution