Printronix SL4M - Manual (Page 99)

EMULATION Submenus
99
Auto Uppercase
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
• Disable (factory default). The printer will print text in upper and
lowercase.
• Enable . The printer will print text in uppercase only.
Slash 0
This parameter allows you to print the numeral “0” with or without the slash.
This option applies to all character sets except OCR A and OCR B.
• Disable (factory default). Zero is printed without a slash.
• Enable . Zero is printed with a slash.
Select SFCC
You can specify which decimal code (1-255) will be used as the Special
Function Control Code (SFCC). The SFCC denotes that the following data is
a PGL command.
The range is 1-255, and the factory default is 126.
Host Form Length
Determines how the physical label length (see Label Length under the MEDIA
SETUP menu) is affected upon receiving an EXECUTE command.
• Enable (factory default). The physical label length will change to match
the form length (specified in CREATE command). The physical label size
remains at the new setting until another EXECUTE command is received,
or the PRINTER SETUP menu settings are changed.
• Var. Length . The physical label length is the longest print element
defined in CREATE mode, including both static and dynamic elements,
plus the setting of “Var Form Adjust” with CREATE;NAME;0.
• Var Dynamic Len . The physical label length will change to the longest
print element defined in the form, including the dynamic element in
EXECUTE mode and the static element in CREATE mode, plus the
setting of “Var Form Adjust” with CREATE;NAME;0.
• Disable . Forms printed in EXECUTE mode do not change the physical
label size. Therefore, the size of the form (defined in CREATE mode)
must fit within the current label dimensions, or errors may occur.
NOTE: The difference between Var. Length and Var Dynamic Len is for
example, CREATE;NAME;0. If there are 10 dynamic fields defined in
CREATE mode, but only three dynamic fields are used in EXECUTE
mode (for Var. Length), the label length will be based on the longest
printed element among the 10 dynamic field and the static element
defined in CREATE mode. For Var Dynamic Len, the label length will
be based on the longest printed element among the three fields
defined in EXECUTE mode and the Static element defined in
CREATE mode.