Printronix SL4M - Manual (Page 220)

220
Appendix A
Media
Table 17. Media - General Information
Type Roll-fed, die-cut continuous or fanfold labels, tags or tickets;
most direct thermal or thermal transfer materials.
Supply Roll 8.0 inch (203.2 mm) maximum outside diameter on a
3 inch (76.2 mm) diameter core.
Rewinder Accepts a full roll of backing from an 8 inch diameter roll of
labels.
Label Material Thermal transfer plain-coated papers, vinyl, Mylar, metallized
paper, non-woven fabric, fine woven fabric, thermal-visible light
scannable paper, infrared scannable paper, thermal ticket/tag
stock, thermally-sensitive plastic stock.
Media Sensing Horizontally moveable sensor assembly. When set to Gap, the
assembly detects die-cut labels on liner media and notches and
holes in tag stock. When set to Mark, it senses a black mark on
the underside of tag or label stock. When set to Disable, it
senses no label indicators or ignores all existing label length
indicators on the installed media. Also detects paper out.
Label Taken Sensor Detects when a printed label is at the printer exit throat. Used
only for Peel-Off Media Handling mode.
Label Peel-Off Peels and presents label to the operator, one at a time.
Label Peel-Off is supported only when using the Standard Peel
option or Peel-Liner Rewinder option.
Standard Peel Peels labels while discarding the dispensed liner in front of the
printer. Optional installation.