Printronix SL4M - Manual (Page 78)

78
Chapter 4 MEDIA SETUP Menu
Num Auto Labels
The desired number of labels to be printed vertically adjacent on the form.
The value is selectable with a range of 1 through 40 labels.
The factory default is 2.
Slew Speed Ctrl
The speed at which the printer moves media without actually printing on it.
• Automatic (factory default). Always the same as the print speed.
• Manual . Allows you to set the slew speed. The maximum speed depends
on your printer model (see “Print Method” on page 219).
Print Direction
This option determines the basic print image orientation.
NOTE: Print Direction will not change the orientation of any print test patterns
in the DIAGNOSTIC menu.
Print Direction has two options:
• Head First
• Foot First
For example, with Portrait orientation, when you select Head First, the top-of-
form will come out of the printer first. Conversely, when you select Foot First,
the bottom-of-form will come out first.
Print Direction and Orientation are two independent options that can be
combined to produce the following results depending on the Active IGP
Emulation:
Table 8. Head First
Print Direction
Option
Orientation Option
Result in Active IGP Emulations
(PGL)
Head First Portrait Portrait
Head First Landscape Landscape
Head First Inv. Portrait Inv. Portrait
Head First Inv. Landscape Inv. Landscape
Head First
FEED
A
A
Foot First