Asus GigaX3124 - Manual (Page 104)

GigaX3124 Layer3 Switch CLI Command Reference
79
12.14 (permit|deny) host MACADDR host
MACADDR vlan <1-4094> cos <0-7>
[IFNAME]
Syntax (permit|deny) host MACADDR host MACADDR vlan <1-4094>
cos <0-7> [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
host A single source host
MACADDR Source MAC address xxxx.xxxx.xxxx
host A single destination host
MACADDR Destination MAC address xxxx.xxxx.xxxx
vlan IEEE 802.1Q VLAN
<1-4094> VLAN ID
cos Class of Service
<0-7> the priority value
[IFNAME] Egress interface name
Command Mode Mac access-list extended mode
No/clear
no (permit|deny) host MACADDR host MACADDR vlan
<1-4094> cos <0-7> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-mac-acl)# permit host 0000.0000.0001 host
0000.0000.0002 vlan 10 cos 2 [gi1/0/2]
12.15 (permit|deny) MACADDR MASK MACADDR
MASK [IFNAME]
Syntax (permit|deny) MACADDR MASK MACADDR MASK [IFNAME]
Parameters permit Specify packets to forward