Asus GigaX3124 - Manual (Page 211)

GigaX3124 Layer3 Switch CLI Command Reference
186
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
IPADDR Destination address
MASK Destination wildcard bits
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp IPADDR MASK IPADDR MASK <0-255>
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp 10.0.0.1 0.0.0.0 10.0.0.2
0.0.0.0 2 [gi1/0/1]
13.111 (permit|deny) icmp host IPADDR IPADDR
MASK <0-255> [IFNAME]
Syntax (permit|deny) icmp host IPADDR IPADDR MASK <0-255>
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
host A single source host
IPADDR Source address
IPADDR Destination address
MASK Destination wildcard bits
<0-255> ICMP message type