Asus GigaX3124 - Manual (Page 196)

GigaX3124 Layer3 Switch CLI Command Reference
171
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
any any source address
IPADDR Destination address
MASK Destination wildcard bits
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp any IPADDR MASK <0-255> code
<0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp any 10.0.0.1 0.0.0.0 2 code 3
[gi1/0/2]
13.92 (permit|deny) (tcp|udp) IPADDR MASK
IPADDR MASK [eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp|) IPADDR MASK IPADDR MASK [eq]
[<0-65535>] [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
IPADDR Source address
MASK Source wildcard bits
IPADDR Destination address
MASK Destination wildcard bits
eq Match only packets on a given port numbe
<0-65535> Port number