Asus GigaX3124 - Manual (Page 137)

GigaX3124 Layer3 Switch CLI Command Reference
112
Examples ASUS(config)# access-list 100 permit icmp host 1.1.1.1 1.1.1.4
0.0.0.0 2 code 3
13.22 access-list (<100-199>|<2000-2699>)
(deny|permit) (ip|tcp|udp|icmp) host IPADDR
host IPADDR [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit)
(ip|tcp|udp|icmp) host IPADDR host IPADDR [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
host A single Source host
IPADDR Source address
host A single destination host
IPADDR Destination address
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit)
(ip|tcp|udp|icmp) host IPADDR host IPADDR [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit icmp host 1.1.1.1 host
1.1.1.4