Asus GigaX3124 - Manual (Page 54)

GigaX3124 Layer3 Switch CLI Command Reference
29
3 Port interface configuration:
Type “interface IFNAME” in global configuration mode, then start to configure
interface.
3.1 acceptable frame-type (all| discard-all| vlan-
tagged-only)
Syntax acceptable frame-type (all| discard-all| vlan-tagged-only)
Parameters all Accept all packets
discard-all Discard all packets
vlan-tagged-only Accept VLAN-tagged packets only
Command Mode Interface configuration mode
No/clear
show
show interface IFNAME
Default Accept all packets.
Description Use the acceptable frame type configuration command on
the switch stack or standalone switch to set the type of the
acceptable frame, for any kind of frame type is accepted or only
vlan-tag frame is accepted.
Examples ASUS(config-if)# acceptable frame-type all
3.2 auto-negotiation
Syntax auto-negotiation
Parameters
Command Mode Interface configuration mode
No/clear
no auto-negotiation
Show show interface IFNAME
Default The default is enable
Description Use the auto-negotiation configuration command on the switch
stack or standalone switch to set auto-negotiation status of the
port.
Examples ASUS(config-if)# auto-negotiation