Asus GigaX3124 - Manual (Page 220)

GigaX3124 Layer3 Switch CLI Command Reference
195
15 QoS/CoS:
15.1 cos cos-map <0-7> <1-8>
Syntax cos cos-map <0-7> <1-8>
Parameters <0-7> IEEE 802.1p priority
<1-8> Class of Service (CoS) Priority Queue ID
Command Mode Global configuration mode
No/clear
no cos cos-map
Show show cos cos-map
Default
Description
Use the queue cos-map configuration command on the switch
stack or standalone switch to set which Cos queue a given
priority should map into.
Example ASUS(config)# cos cos-map 3 1
15.2 cos policy fifo
Syntax cos policy fifo
Parameters fifo First In First Out
Command Mode Global configuration mode
No/clear
no cos policy
Show show cos policy
Default The default setting of qos ploicy is strict mode
Description This command sets CoS scheduling policy to First In First Out
mode
Example ASUS(config )# cos policy fifo