Asus GigaX3124 - Manual (Page 173)

GigaX3124 Layer3 Switch CLI Command Reference
148
ACLNAME an access-list name
Command Mode Global configuration mode
No/clear
no ip access-list standard (<1-99>|<1300-1999>|ACLNAME)
Show show access-lists [ACLNAME]
Default
Description
This command defines an standard IP access list using a name
or number, and enter access-list configuration mode.
Examples ASUS(config)# ip access-list standard 99
13.62 (permit|deny) any [IFNAME]
Syntax (permit|deny) any [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
any Any source host
[IFNAME] Egress interface name
Command Mode IP standard access-list mode
No/clear
no (permit|deny) any [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# ip access-list standard 99
ASUS(config-std-acl)# permit any [gi1/0/1]
13.63 (permit|deny) host IPADDR [IFNAME]
Syntax (permit|deny) host IPADDR [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
host A single host address
IPADDR Host address