Asus GigaX3124 - Manual (Page 215)

GigaX3124 Layer3 Switch CLI Command Reference
190
13.116 (permit|deny) icmp IPADDR MASK any
[<0-255>] [IFNAME]
Syntax (permit|deny) icmp IPADDR MASK any [<0-255>] [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
any any destination address
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp IPADDR MASK any [<0-255>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp 10.0.0.1 0.0.0.0 any 2
[gi1/0/1]
13.117 (permit|deny) icmp host IPADDR any
[<0-255>] [IFNAME]
Syntax (permit|deny) icmp host IPADDR any [<0-255>] [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
host A single source host
IPADDR Source address.
any any destination address