Asus GigaX3124 - Manual (Page 289)

GigaX3124 Layer3 Switch CLI Command Reference
264
24 RIP related Configuration
24.1 default-information originate
Syntax default-information originate
Parameters originate Distribute a default route
Command Mode Config-router mode
No/clear
no default-information originate
Show show running-config
Default Not enable
Description Set RIP to distribute the default route of the system.
Examples ASUS(config-router)# default-information originate
24.2 default-metric <1-16>
Syntax default-metric <1-16>
Parameters <1-16> Metric value
Command Mode Config-router mode
No/clear
no default-metric
Show show ip rip status
Default RIP metric is a value for distance for the network. Usually RIP
daemon increment the metric when the network information is
received. Redistributed routes’ metric is set to 1.
Description This command modifies the default metric value for redistributed
routes.
Examples ASUS(config-router)# default-metric 2
24.3 distance <1-255>
Syntax distance <1-255>
Parameters <1-255> Distance value
Command Mode Config-router mode