Asus GigaX3124 - Manual (Page 223)

GigaX3124 Layer3 Switch CLI Command Reference
198
Default
Description
Show which CoS queue given priority current maps to
Example ASUS# show cos cos-map
15.7 show cos policy
Syntax show cos policy
Parameters
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
This command shows the cos policy.
Example ASUS# show cos policy
15.8 show qos (egress|ingress) bandwidth
[IFNAME]
Syntax show qos (egress|ingress) bandwidth [IFNAME]
Parameters egress Egress traffic
ingress Ingress traffic
[IFNAME] Interface name
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
This command used to show the Qos bandwidth informational
parameter for the outgoing/incoming packets.
Example ASUS# show qos egress bandwidth gi1/0/1