Asus GigaX3124 - Manual (Page 186)

GigaX3124 Layer3 Switch CLI Command Reference
161
13.79 (permit|deny) icmp IPADDR MASK IPADDR
MASK <0-255> code <0-255> [IFNAME]
Syntax (permit|deny) icmp IPADDR MASK IPADDR MASK <0-255>
code <0-255> [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
IPADDR Destination address
MASK Destination wildcard bits
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp IPADDR MASK IPADDR MASK <0-255>
code <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp 10.0.1.0 0.0.0.255 10.0.0.2
0.0.0.0 2 code 2 [gi1/0/2]
13.80 (permit|deny) (ip|tcp|udp|icmp) host IPADDR
IPADDR MASK [IFNAME]
Syntax (permit|deny) (ip|tcp|udp|icmp) host IPADDR IPADDR MASK
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.