Asus GigaX3124 - Manual (Page 244)

GigaX3124 Layer3 Switch CLI Command Reference
219
Command Mode Global configuration mode
No/clear
Show
show dot1x radius / show running-config
Default
Description
This command sets the secondary radius server IP, radius key,
and radius port for 802.1X configuration.
Example ASUS(config)# dot1x radius secondary-server 192.192.1.2
testing 1812
18.5 dot1x re-authenticate interface IFNAME
Syntax dot1x re-authenticate interface IFNAME
Parameters IFNAME interface’s name
Command Mode Global configuration mode
No/clear
Show
show dot1x interface IFNAME
Default
Description
Use the dot1x re-authenticate interface configuration command
on the switch stack or on a standalone switch to manually initiate
a re-authentication of all 802.1X-enabled ports or the specified
802.1X-enabled port.
Example ASUS(config)# dot1x re-authenticate interface gi1/0/1
18.6 dot1x reauthentication
Syntax dot1x reauthentication
Parameters reauthentication periodic reauthentication of the client
Command Mode Interface configuration mode
No/clear
no dot1x reauthentication
Show show dot1x / show dot1x interface IFNAME
Default The default is disable
Description Use the dot1x reauthentication interface configuration command
on the switch stack or on a standalone switch to enable periodic
re-authentication of the client. Use the no form of this command