Asus GigaX3124 - Manual (Page 171)

GigaX3124 Layer3 Switch CLI Command Reference
146
13.58 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp any IPADDR MASK
<0-255> [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) icmp any
IPADDR MASK <0-255> [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
any Any Source host
IPADDR destination address
MASK destination wildcard bits
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp any
IPADDR MASK <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit icmp any 10.0.0.1 0.0.0.0
1
13.59 ip access-group (<1-199>|<1300-2699>|ACLN
AME) in
Syntax ip access-group (<1-199>|<1300-2699>|ACLNAME) in