Asus GigaX3124 - Manual (Page 290)

GigaX3124 Layer3 Switch CLI Command Reference
265
No/clear no distance <1-255>
Show show ip rip status
Default Default RIP distance is 120.
Description Set default RIP distance to specified value.
Examples ASUS(config-router)# distance 100
24.4 distance <1-255> A.B.C.D/M
Syntax distance <1-255> A.B.C.D/M
Parameters <1-255> Distance value
A.B.C.D/M IP source prefix
Command Mode Config-router mode
No/clear
no distance <1-255> A.B.C.D/M
Show show ip rip status
Default Default RIP distance is 120.
Description Set default RIP distance to specified value when the route’s
source IP address matches the specified prefix.
Examples ASUS(config-router)# distance 100 10.0.0.5/24
24.5 ip rip authentication mode text
Syntax ip rip authentication mode text
Parameters
Command Mode Interface configuration mode
No/clear
no ip rip authentication mode
Show show running-config
Default
Description
Set the interface with RIPv2 simple password authentication.
Examples ASUS(config-if)# ip rip authentication mode text