Asus GigaX3124 - Manual (Page 133)

GigaX3124 Layer3 Switch CLI Command Reference
108
Description This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit udp 1.1.1.1 0.0.0.0 eq 21
host 1.1.1.4 eq 22
13.18 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp IPADDR MASK host
IPADDR <0-255> code <0-255> [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) icmp
IPADDR MASK host IPADDR <0-255> code <0-255> [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
IPADDR source address
MASK source wildcard bits
host A single destination host
IPADDR Destination address
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp
IPADDR MASK host IPADDR <0-255> code <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.