Asus GigaX3124 - Manual (Page 318)

GigaX3124 Layer3 Switch CLI Command Reference
293
Show show running-config
Default
Description
This command redistributes routing information from kernel,
connected, static or RIP route entries with specified metric value
and type into the OSPF tables.
Examples ASUS(config-router)# redistribute connected metric 10 metric-
type 2
25.39 refresh timer <10-1800>
Syntax refresh timer <10-1800>
Parameters Timer Set refresh timer
<10-1800> Timer value in seconds
Command Mode Config-router mode
No/clear
no refresh timer
Show show ip ospf
Default The default is 10 sec.
Description To set the OSPF refresh timer.
Examples ASUS(config-router)#refresh timer 100
25.40 router-id A.B.C.D
Syntax router-id A.B.C.D
Parameters A.B.C.D OSPF router-id in IP address format
Command Mode Config-router mode
No/clear
no ospf router-id
Show show ip ospf
Default
Description
To set OSPF router ID.
Examples ASUS(config-router)# router-id 10.0.0.3