Asus GigaX3124 - Manual (Page 188)

GigaX3124 Layer3 Switch CLI Command Reference
163
eq Match only packets on a given port numbe
<0-65535> Port number
IPADDR Destination address
MASK Destination wildcard bits
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>]
IPADDR MASK [eq] [<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp host 10.0.0.1 eq 2 10.0.0.2
0.0.0.0 eq 2 [gi1/0/2]
13.82 (permit|deny) icmp host IPADDR IPADDR
MASK <0-255> code <0-255> [IFNAME]
Syntax (permit|deny) icmp host IPADDR IPADDR MASK <0-255> code
<0-255> [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
host A single source host
IPADDR Source address
IPADDR Destination address
MASK Destination wildcard bits
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name