Asus GigaX3124 - Manual (Page 226)

GigaX3124 Layer3 Switch CLI Command Reference
201
Default
Description
This command is used to configure a traffic classifier match
criterion using ACL rule.
Examples ASUS(config-pmap-class)# match access-group acl
16.4 match ip dscp DSCPLIST
Syntax match ip dscp DSCPLIST
Parameters DSCPLIST IP DSCP <0-63> value, maximum 8 values
Command Mode Policy-map-class configuration mode
No/clear
no match ip dscp
Show show policy-map [POLICYMAP]
Default
Description
This command is used to configure a traffic classifier match
criterion using IP DSCP values.
Examples ASUS(config-pmap-class)# match ip dscp 3-5
16.5 match ip precedence IPPRECEDENCES
Syntax match ip precedence IPPRECEDENCES
Parameters IPPRECEDENCES IP Precedence <0-7> value, maximum 8
values
Command Mode Policy-map-class configuration mode
No/clear
no match ip precedence
Show show policy-map [POLICYMAP]
Default
Description
This command is used to configure a traffic classifier match
criterion using IP Precedence values.
Examples ASUS(config-pmap-class)# match ip precedence 3
16.6 police <64-1048576> <4-512>
Syntax police <64-1048576> <4-512>