Asus GigaX3124 - Manual (Page 197)

GigaX3124 Layer3 Switch CLI Command Reference
172
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp|) IPADDR MASK IPADDR MASK [eq]
[<0-65535>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp 10.0.0.1 0.0.0.0 10.0.0.2 0.0.0.0
eq 23 [gi1/0/1]
13.93 (permit|deny) (tcp|udp) IPADDR MASK [eq]
[<0-65535>] IPADDR MASK [IFNAME]
Syntax (permit|deny) (tcp|udp|) IPADDR MASK [eq] [<0-65535>]
IPADDR MASK [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
IPADDR Source address
MASK Source wildcard bits
eq Match only packets on a given port numbe
<0-65535> Port number
IPADDR Destination address
MASK Destination wildcard bits
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) IPADDR MASK [eq] [<0-65535>]
IPADDR MASK [IFNAME]
Show show access-lists [ACLNAME]
Default