Asus GigaX3124 - Manual (Page 66)

GigaX3124 Layer3 Switch CLI Command Reference
41
Description Use the switchport trunk allowed vlan configuration command
on the switch stack or standalone switch to add or remove the
allowed VLANs that can receive and send traffic on this interface
in tagged format when in trunking mode
Example ASUS(config-if)# switchport trunk allowed vlan add 2-20
4.8 vlan VLANLIST
Syntax vlan VLANLSIT
Parameters VLANLIST VLAN ID <1-3000> list
No/clear no vlan <1-3000>
Command Mode Global configuration mode
Show
show vlan [VLANID]
Default VLAN 1 is default created.
Description Use the vlan command to create vlan entry on the switch.
Example ASUS(config)# vlan 2
ASUS(config)# vlan 3,6,10-20