Asus GigaX3124 - Manual (Page 300)

GigaX3124 Layer3 Switch CLI Command Reference
275
No/clear no area (A.B.C.D| <0-4294967295>) range A.B.C.D/M
Show show running-config
Default
Description
To set the summarizing routes range for the specified area.
Examples ASUS(config-router)# area 0.0.0.2 range 192.192.0.0/16
25.5 area (A.B.C.D| <0-4294967295>) range
A.B.C.D/M (advertise| not-advertise)
Syntax area (A.B.C.D| <0-4294967295>) range A.B.C.D/M
(advertise|not-advertise)
Parameters A.B.C.D OSPF area ID in IP address format
<0-4294967295> OSPF area ID as a decimal value
(ID 0.0.0.2 equals ID 2)
range Summarize routes matching address/mask (border
routers only)
A.B.C.D/M Area range prefix
advertise Advertise this range (default)
not-advertise DoNotAdvertise this range
Command Mode Config-router mode
No/clear
no area (A.B.C.D| <0-4294967295>) range A.B.C.D/M
(advertise|not-advertise)
Show show running-config
Default The default is advertise
Description To set the summarizing routes range and advertise/not-advertise
for the specified area.
Examples ASUS(config-router)# area 0.0.0.2 range 192.192.0.0/16 not-
adevertise
25.6 area (A.B.C.D| <0-4294967295>) range
A.B.C.D/M cost <0-16777215>
Syntax area (A.B.C.D| <0-4294967295>) range A.B.C.D/M cost