Asus GigaX3124 - Manual (Page 68)

GigaX3124 Layer3 Switch CLI Command Reference
43
5.3 garp leaveall-timer <1-100000000>
Syntax garp leaveall-timer <1-100000000>
Parameters leaveall-timer Leaveall timer
<1-100000000> the timer values
Command Mode Interface configuration mode
No/clear
no garp leaveall-timer
Show show garp timer IFNAME
Default The default is 1000 (centi-seconds)
Description This command sets the garp leaveall-timer value in the indicated
interface port.
Example ASUS(config-if)# garp leaveall-time 2000
5.4 show garp timer [IFNAME]
Syntax show garp timer [IFNAME]
Parameters timer the setting timer values (join, leave, and leaveall timer)
[IFNAME] Interface name
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
To show garp timer IFNAME status.
Example ASUS# show garp timer [gi1/0/1]