Asus GigaX3124 - Manual (Page 148)

GigaX3124 Layer3 Switch CLI Command Reference
123
tcp Transmission Control Protocol
udp User Datagram Protocol
IPADDR Source address
MASK Source wildcard bits
eq Match only packets on a given port numbe
<0-65535> Port number
IPADDR Destination address
MASK Destination wildcard bits
[IFNAME] Egress interface name
Command Mode Global configuration mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK [eq] [<0-65535>] IPADDR MASK [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 100 permit tcp 1.1.1.1 0.0.0.0 eq 21
1.1.1.4 0.0.0.0
13.34 access-list (<100-199>|<2000-2699>)
(deny|permit) (tcp|udp) IPADDR MASK any
[eq] [<0-65535>] [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK any [eq] [<0-65535>] [IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol